The W12 series is the most accurate and easy-to-use full pre-rolling machine series. The highly technical and innovative W12 series ensures high productivity, and its efficiency is more than 4 times that of the traditional three-roller rolling machine. In addition, due to its equipment structure and method, the W12 series can be effectively controlled by the CNC system.
CHAOLI's W12 series are equipped with a rear roller opposite to the feed side. The roller is used as a backing, which can make the rolled plate immediately and accurately aligned. In addition, the sheet is always clamped between the two center rollers, thus avoiding accidental slippage. This not only optimizes the pre-rolling and rolling operations, but also ensures safer and more precise processing, with the option of being completely operated by a single operator.
Due to the linear guide configuration of the W12 series of rolling rolls, the pre-rolling operation does not require the sheet to be tilted below the feed level, as is the case with the traditional 3-roll rolling rolls. Therefore, in this way, a horizontal feeding table can be used to more easily feed the plates into the machine. In addition, there is no need to leave free space on both sides of the machine, only free space on the selected feeding side.