CHAOLI is able to produce W12 series four-roller plate rolling machines with a thickness of 220mm.
The W12 series is forward-looking, efficient and reliable.
The W12 series improves production efficiency through its high-speed rolling capability, and because of its ease of use, it overcomes the most challenging rolling rolling.
In the W12 series four-roller plate rolling machine, one of the side rollers can be used as a straightening roller, so it can easily and accurately align the medium and thick plates along the input direction of the roller.
Fewer flat ends in single pass
In the W12 series of four-roll machines, since the upper and lower rollers can clamp the material during the pre-rolling and rolling process, and precisely squeeze the plate, it can achieve full-tube molding at one time, thereby reducing costs.
Product Description:
The steel plate 4 roll rolling machinehas the function of pre-rolling the edge of the plate, which can bend the plate at a time without any need to re-roll or pre-bend and roll forming through the combined process. The upper roller and the lower roller are the main driving rollers, and the up and down movement of the rollers on both sides is controlled by hydraulic drive. The up and down displacement of the bottom roller and the side roller are controlled by a computer. Automatic leveling, screen display, high synchronization accuracy ±0.2MM. The unloading and resetting of the inverted bearing body is completed by hydraulic transmission. The upper roll end is equipped with a balancing device to facilitate the removal of the rolling cylinder and the workpiece. There is a movable independent operating table, which is convenient for mobile operation.
Structure:
1. The four-roller rolling machine adopts the torsion shaft synchronization structure, and the four-roller rolling machine has high precision and high roundness after being rolled up!
2. Fully hydraulic motor drive, four-roller coiling machine, environmental protection and energy saving.
3. The straight side is short and the pre-rolling effect is good! More suitable cone rolling.
4. The four-roll winding process is completed at one time, including bilateral pre-rolling. The four-roll winder is fast, efficient, and easy to operate, requiring only one operator.
5. With automatic alignment and clamping functions, the plate will not slip and deviate.
6. The four-roller rolling machine has anti-overload and hydraulic protection functions.