+86-13606279128
English 
Views: 318 Author: Site Editor Publish Time: 2021-10-18 Origin: Site
The electric joint rolling machine has its characteristics and functions, which lead to their structural differences. Therefore, they can be widely used in cutting, pickling, polishing, and heat treatment after grinding, tinning, and galvanizing. It has been widely used in modern automobile production and industrial production.
How to correctly check and debug the electric joint rolling machine?
What is the scope of use of the electric joint rolling machine?
What is the difference between a semi-auto plate roller and a full electric joint rolling machine?
In the daily work process of the electric joint rolling machine, with the increase of working time, the growth of machine age, and its aging, the working efficiency of the plate bending machine will be seriously reduced. Therefore, fault detection and daily maintenance of the plate bending machine are very important to work.
There are generally three methods to detect the fault of an electric joint rolling machine.
1. One is interfaced signal detection. That is, the principle of this detection method is to check through programmable, such as some signal lights prompted by the control system and mutual exchange lights. A simple analysis can check the fault.
2. The second is equipment testing. In case of failure of the electric joint rolling machine, we can use the equipment detector provided with the bending machine. Its principle is to detect whether each circuit of the electric joint rolling machine is normal, to find out the corresponding failure.
3. The third is empirical analysis. The staff would have to agree that the maintenance method is not a common one, but the staff would have to know if it takes a long time to operate the electric joint rolling machine. However, this method is not a common one.
The electric joint rolling machine is auxiliary equipment in the rolling workshop that coils hot-rolled or cold-rolled steel into coils. It is arranged behind the finished stand on the hot strip continuous rolling mill (hot continuous rolling mill), cold strip continuous rolling mill, and wire rod rolling mill. ; On a single-strand reversible cold strip mill, it is installed before and after the mill. In addition, it is also installed in various finishing units such as continuous pickling units, slitting, annealing, coating, and so on. electric joint rolling machines are used in many industries. Steel plate electric joint rolling machines in the metallurgical industry are the most representative, driven by electricity and fluids.
Due to the characteristics of the cross-sectional shape of the cold, hot-strip steel, and wire rod, it is possible to use an electric joint rolling machine to bend the steel into a coil immediately after rolling, to increase the weight of the raw material, increase the rolling speed, and reduce the temperature difference between the head and tail of the rolling. Provides powerful conditions, which leads to an increase in product output and quality; in addition, the rolled material in electric joint rolling machine is easy to transport, which is the common feature and function of various types of coilers
1. Rolling of semi-electric joint rolling machine, measure with an open ring, and roll again according to the data adjustment device after measurement.
2. The rolling and measuring of the electric joint rolling machine is a closed-loop, and the re-adjusting device of the rolling and measuring is automatically completed before reaching the preset value. And close. Unmount the working block. all.
The electric joint rolling machine has achieved an irreplaceable position in industrial production. ChaoLi Company is committed to providing various bending and rolling machines of high quality for all customers from all over the world.
