This mechanical model is designed for light to medium-sized jobs. It is used for materials whose thickness does not exceed 3 mm. It is used for aluminum bending, air-conditioning channels, advertising panels and metal plate covers. Its ideal price makes it very attractive for small workshops
"Standard accessories:
"•The top and bottom rollers are driven by a single gearbox and gear system
• Q235 quality certified steel coil with high tensile strength
•Cast iron main frame
• Foot-operated mobile control panel
• Cone bending device
• Manual lowering end
• Wire groove at the end of the roll
•Precise bending with brake motor
3 roller hydraulic plate bending machine uses a planetary gear box connected to a sturdy motor to drive the top and side rollers at a speed of 4.0-6.0mm per minute. For more powerful piston direct squeeze rollers and transverse squeeze rollers, the standard configuration is uniform linear motion. The direct movement function allows the operator to form a tighter diameter with less workload. The four-roll bending machine uses industrial hydraulic motors to move the rolls. Three digital readouts are also included to provide accurate scroll position. Each steel plate roller includes an operator control seat for controlling all movements of the machine. Integrated safety features such as machine tether and emergency stop switch are also included.
Fully hydraulic, including roll adjustment and lowering end
Single-roller or three-roller drive
Induction hardened roll
Three electronic digital readers
Cone bending attachment
Overload protection system
Hydraulic balance system
Hydraulic tiltable top roller
Optional equipment
NC and CNC control
Overhead bracket
Hydraulic side support
Polished roll
Finished product pusher
Roll electronic balance system
Rolling weldment accumulator
1, drum-shaped upper roll, lower roll lower roll with the adjustment, improve the straightness of high-precision products, the use of drum-shaped upper roll, upper roll drum pre-set amount generally for the roll uniform load of 70% to pre-set; smaller diameter of the lower roll, the lower part of the lower roll with the upper and lower adjustable roll support. According to the load of the rolled products, the lower part of the lower roller is adjusted to the support roller, which greatly improves the straightness of the products.
2, rear bending rolling, improve the roundness of high-precision products
The upper roll universal type plate rolling machine adopts rear bending (the direction of plate feeding is opposite to the direction of upper roll movement), the upper roll is pressed down while the lower roll is rotated, continuous bending, the end pre-bending of the plate is directly pressed and pre-bent, avoiding the generation of the rear angle of the front bending, and the length and shape of the remaining straight edge can be controlled. The general three-roller asymmetric type using front bending, the first two ends of the plate pre-bending, and then symmetrical rolled into shape, requiring skilled operators, the product appears after the corner, and the shape of the remaining straight edge is difficult to control.