The industrial 2 roller plate rolling machine is the best product on the market, suitable for mass production of bending parts from thinner plates. The machine has a high molecular weight polyurethane coated bottom roll and a steel top roll used as a mandrel. The bending principle obtained by the machine design allows closing parts with very small diameters. It also offers many advantages over traditional bending methods because it can completely roll-bend parts in one pass, with perfect roundness and record time. To obtain a larger diameter, you only need to place a tubular mandrel on the top roller, which will change the impression contact arc, thereby changing the diameter of the workpiece you want to obtain. The 2-roll bending machine performs well in mass production. In fact, once adjusted, the pressure of the roll will reach a specific target without any further adjustments: the hydraulic system can return to the same position after each bend, thereby reducing downtime. The holes and cuts on the blank will not affect the perfect bending of the finished product.
No deterioration in surface finish of parts
Thanks to the use of polyurethane-coated rollers, you can bend and polish aluminum or stainless steel plates without damaging their surface.
Reduce the straight part at the end
Using the maximum pressure between the 2 rollers, you can get a perfectly parallel seamless seam.