What should people pay attention to when using the plate rolling machine?

The upper roller of the symmetrical plate bending machine acts on the piston to move vertically through the hydraulic oil in the hydraulic cylinder at the center symmetrical position of the two lower rollers, thereby acting on the production. Because the working principle of the plate rolling machine is complicated, we have many points to pay attention to during the use process.

• What are the tips for using the plate rolling machine?

• How to check the failure of the plate rolling machine?

• How to solve the general failure of the plate rolling machine?

What are the tips for using the plate rolling machine?

Usually, the plate rolling machine is a three-roller, and the flat plate needs to be rolled into a circle. The head section and the tail section cannot be rolled out in a certain length range. The head section and the tail section must be pressed out with a head machine in advance. The arc with the same round shape is called the indenter, and its purpose is to improve the utilization of materials. For example, the head and tail sections are cut off after being rolled into a round shape, which is too wasteful.

How to check the failure of the plate rolling machine?

The failure of a universal plate rolling machine is generally divided into three methods after detection.

1. One is interfaced signal detection. That is to say, the principle of this detection method is to check through programmable, such as some signal lights prompted by the control system and the exchange of lights between each other, and a simple analysis can check the fault.

2. The second is equipment testing. When the plate rolling machine fails, we can use the equipment detector that comes with the purchase of the coiling machine. The principle is to detect whether the various circuits of the coiling machine are normal to find out the corresponding fault.

3. The third is the empirical analysis method. Workers who have operated the plate rolling machine for a long time will generally know where the fault has occurred, a common method, but this method is not our recommended method, because the unprofessional nature of the staff will always bring danger. Therefore, if you want to repair, you must get the approval of the organization.

A motor stop strike occurs during work. In this case, the circuit may be overloaded or the plate rolling machine may perform the coiling of the board that exceeds the load. This kind of field is divided into overload and other situations.

How to solve the general failure of the plate rolling machine?

1. Re-adjust the load capacity of the circuit. The coiling object of the plate rolling machine is also determined by the load capacity of the machine tool. If the load capacity exceeds the load capacity, the plate will not be rolled.

2. The fault characteristic is that the main shaft of the plate rolling machine heats up. In this case, it is usually caused by the correct installation of the plate rolling machine components, such as the seating position, and the wear and tear of the shaft journal and hole of the main shaft. Re-adjust the main shaft and components of the universal plate rolling machine, and inject lubricating oil into appropriate parts.

After understanding the working process of the plate rolling machine and practical points of attention, we have a deeper understanding of the rolling machine. To meet these growing demands, ChaoLi Company has various rolling and bending machines that are more effective, reliable, and consistent.